Contrasting sleeve plackets.
william-sews.com
Mark placket line.
Cut a contrast piece of fabric approximately 18cm

Stitch 1cm from the line, 1 cm from the top of the piece. Place a piece of the main colour, cut to 20cm x6cm (8"

Stitch the same as the other piece, stitch across the top, joining the two seams.
Cut through the sleeve along the line, cutting

Press a small (5mm) seam on the outside edge of both pieces.

Edge stitch the contrast piece in place.

Fold the upper placket over the lower, press.
Press
the top to a point or square, depending on preference.Use fabric glue stick if the point won’t sit properly, keep the glue away from the edges.






Comments
Post a Comment